NOTE I haven’t tired this as I don’t need to nor have I installed aftermarket bucket seats This allows you to start the car without having to depress the clutch select “Settings and manufacture settings” NOTE as you can see, I have two keys out there in the world from the previous owner as I only own two of them you may also disable keys if you lost them from this menu as well To check the number of keys you have used: Switching to passenger will disable the auto-tilt. **note if “Memory” is unchecked mirror switch must be set to driver for tilt to work (by default it tilts to the maximum amount).
PA SOFT BMW SCANNER 1.4 DRIVER
Switching to driver will disable the auto-tilt. NOTE if “Memory” is checked mirror switch must be set to passenger for option to work. to set your position, have switch on passenger side, and adjust your mirror while in reverse gear The mirror will tilt to your personal position. To change the tilt of the passenger mirror when in reverse: check “No” to unlock all doors with one press of the unlock button A second click unlocks remainder passenger doors
PA SOFT BMW SCANNER 1.4 DRIVERS
This allows one click of the unlock button of the remote to unlock the drivers door. NOTE the lock button closes and unlock opens the windows upon holding of the key check “Locking (remote control)” to enable closing with remote
![pa soft bmw scanner 1.4 pa soft bmw scanner 1.4](https://ae01.alicdn.com/kf/He8f1114349244fa9b84c36a3a81fcda2E/2021-Good-Quality-For-B-M-W-Scanner-Version-1-4-0-or-2-01-PA.jpg)
default “Opening (remote control)” is checked and “Locking (remote control)” is unchecked To enable remote closing windows (Comfort windows): Siren will still go off if doors are breached. you have the siren and motion sensor but no tilt your DWA will show a fault and will not arm. NOTE you must have all 3 (4 for convertibles) pieces to the alarm otherwise your car will throw a code. check the options with “optics” and “acoustics” uncheck DWA interior sensor, rear (unless you have a convertible which has a front and rear interior sensor) *note if you have bits and pieces of the OEM alarm, you may enable those options To activate the alarm optics without having a physical alarm:
![pa soft bmw scanner 1.4 pa soft bmw scanner 1.4](https://m.media-amazon.com/images/I/61oMWfYUnrL._AC_SL1000_.jpg)
Tick the coding options and press “Write” button… I am able to view lots of settings: Mirrors, One-touch functions, central locking functions, automotive locking, anti-theft system (DWA) etc.
![pa soft bmw scanner 1.4 pa soft bmw scanner 1.4](https://image.slidesharecdn.com/introductionusebmwscanner1-141020221445-conversion-gate02/95/introduction-use-bmw-scanner-140-pa-soft-to-do-coding-6-638.jpg)
Some coding options I have not tested yet but the functions do work. This part I followed some instructions on official PA-Soft 1.4.0 thread in E46 forum.
PA SOFT BMW SCANNER 1.4 32 BIT
I got a most detail document on set up the BMW Scanner 1.4.0 software on Win 7 32 bit (with free software driver download).Īfter well loaded the BMW scanner 1.4 software, plug the cable into the OBD diagnostic connector If your BMW has 20-pin connector under hood, you properly need additional 20-pin to obd2 16 Pin Connector. Here is my little walk-trough on working out the scanner and coding my E46 on win 7.Ĭheap BMW Scanner cable with unlock PA-Software V1.4.0Ī laptop running Win 7 32 bit (Win XP/Win 7 64 bit) I am driving a BMW 320 E46 coupe 2005 and playing around with the cheap BMW Scanner PA-Soft V1.40 OBDII scanner a little bit.